Liquid Immersion Cooling System Dry Coolers For Cooling IT Devices
Immersion Is The Future!
Immersion cooling involves submerging Bitcoin miners in a non-conductive fluid. Though counterintuitive to submerge in a clear, dielectric fluid – fluid is much more effective at dissipating heat than air (roughly 1600x more effective).
Many large data centers have already moved or are seriously considering the move to immersion cooling for a number of reasons:
25-55% MORE TERAHASH
By removing fans and installing immersion specific firmware, it’s possible to overclock new generation Bitmain and Whatsminer mining rigs to earn 25-55% more terahash depending on machine model.
whatsminer M30 running in Shenglin partner`s immersion cooling setup
LESS CAPEX (MACHINES) TO ACHIEVE THE SAME OUTPUT
As a result of producing more hash, each machine will proportionally consume more electricity without sacrificing the machines watt per terahash efficiency (W/TH), which means less machines (~35%) are required to obtain the same hashrate.
LESS CAPEX (MACHINES) TO ACHIEVE THE SAME OUTPUT
In immersion, machines operate in a 100% controlled environment with no dust, no temperature of humidity fluctuations, no impurities. We see the same hash rate per machine day in and day out (within .1 TH), regardless of what outside conditions may be. We estimate this oto result in a significant machine lifespan increase upwards of 50%.
SIGNIFICANTLY REDUCE MACHINE MAINTENANCE
When operating machines in air, it’s nearly impossible to prevent temperature and humidity swings, as well as dust and air impurities from affecting machines. Over years of operating, this exposure results in increased overhead/maintenance and machine failures.
ELIMINATE HVAC & AIR COOLING OVERHEAD
With immersion, fans and expensive HVAC systems are no longer required for machines to keep machines operating within a certain temperature range, which means the energy and capital spent powering the fans and HVAC can now be diverted to computing (more hash power, less overhead).
Features of dry cooler
| High efficiency heat exchanger: capacity designs for maximizing the heat transfer relative to the energy consumption of the fan. Tube and tube coupling design for low pressure drop in the coil on the media sides(maximum 100KPa at water designing condition). Our thermodynamic and aerodynamic designing software is long year tested and proved in Germany |
| Fan: only choose low specific energy consumption fans. Fan nozzle designs for maximum air flow and air throw.Our fans from the world`s leading manufacturer are practically proved to be reliable in operation and long lasting. Motor: protection class IP 54 and insulation class F. Air separator for each fan. |
| We facilitate you to have a long lasting and low maintainance operation. Durable material and rigid enclosure with hard gloss powder coated finish. Protective enclosure for both manifolds and U-bends. Unit design for outdoor installation. 100% leakage tested at 31bar. |
Options
| Coil design refrigerant: water, oil, glycol. | Multiple circuits. |
| Sub-cooling circuits. | Stainless steel or aluminum casing. |
| Coated aluminum or copper fins. | Explosion proof motor. |
| Customized fin spacing. | |
Technical parameter
Dry cooler D1 series parameter (fin space 2.1mm)
| Type | D1-005- 1x350 | D1-006- 1x350 | D1-007- 1x350 | D1-009- 1x450 | D1-011- 1x450 | D1-013- 1x450 | D1-014- 1x500 | D1-017- 1x500 | D1-020- 1x500 |
| Capacity | Water | 35℃ outdoor temp. | Inlet | 45℃ | △ | KW | 4.89 | 5.9 | 6.83 | 9.39 | 10.99 | 13.33 | 14.32 | 17.01 | 19.8 |
| outlet | 40℃ | Y |
| 20% Glycol | Inlet | 45℃ | △ | 4.72 | 5.69 | 6.69 | 8.9 | 10.61 | 13.05 | 13.91 | 16.11 | 19.29 |
| outlet | 40℃ | Y |
| Medium | Water flow | M3/h | 0.85 | 1.03 | 1.2 | 1.63 | 1.91 | 2.3 | 2.5 | 3 | 3.5 |
| Pressure drop | kPa | 36 | 31 | 58 | 25 | 40 | 80 | 50 | 60 | 40 |
| Air flow | △ | M3/h | 2828 | 2712 | 2492 | 6199 | 5827 | 5225 | 8469 | 8168 | 7601 |
| Y |
| Fan motor | Phase | 1 | 1 | 1 | 3 | 3 | 3 | 3 | 3 | 3 |
| △ | W | 140 | 140 | 140 | 540 | 540 | 540 | 830 | 830 | 830 |
| Y |
| △ | A | 0.6 | 0.6 | 0.6 | 1.1 | 1.1 | 1.1 | 1.45 | 1.45 | 1.45 |
| Y |
| Fan | No X φ | 1x1x350 | 1x1x350 | 1x1x350 | 1x1x450 | 1x1x450 | 1x1x450 | 1x1x500 | 1x1x500 | 1x1x500 |
| Sound pressure level | △ | dB(A) | 31 | 31 | 31 | 43 | 43 | 43 | 49 | 49 | 49 |
| Y | 10m |
| Dimension | L | mm | 870 | 870 | 870 | 1020 | 1020 | 1020 | 1220 | 1220 | 1220 |
| W | mm | 525 | 525 | 525 | 625 | 625 | 625 | 825 | 825 | 825 |
| H | mm | 797 | 797 | 797 | 820 | 820 | 820 | 870 | 870 | 870 |
| A | mm | 690 | 690 | 690 | 840 | 840 | 840 | 1040 | 1040 | 1040 |
| B | mm | -- | -- | -- | -- | -- | -- | -- | -- | -- |
| C | mm | -- | -- | -- | -- | -- | -- | -- | -- | -- |
| D | mm | 490 | 490 | 490 | 490 | 490 | 490 | 490 | 490 | 490 |
| Inlet φ | mm | 3/4” | 3/4” | 3/4” | 1” | 1” | 1” | 1-1/4” | 1-1/4” | 1-1/4” |
| Inlet φ | mm | 3/4” | 3/4” | 3/4” | 1” | 1” | 1” | 1-1/4” | 1-1/4” | 1-1/4” |
| Product weight(empty) | kg | 38 | 42 | 48 | 55 | 60 | 67 | 75 | 82 | 91 |
Note: Standard SHSL-D1 dry cooler is vertical air discharge, for horizontal air discharge please add “H” in nomenclature, for excmple:SHSL-D1-005H-1X350
Some immersion cooling system dry cooler reference:
 |  |
| Country: USA Application: Bitcoin immersion cooling system Cooling capacity: 1270kW Cooling medium: BC-888 Supply power: 415V/3P/60Hz Fan brand: Ziehl-Abegg | Country: USA Application: Bitcoin immersion cooling system Cooling capacity: 171kW Cooling medium: bitcoin fluid Supply power: 415V/3P/60Hz Fan brand: Chinese brand |
Product Tags:
|
|
IT Devices Liquid Immersion Submerging Bitcoin Cooling System Images
|
